<h3>[Transcript of how the photo gift-ready pop-up was created].</h3>
Contact.&quot; 
Receive an overview via email or phone call 
↓↓ (in Japanese only) 
Hearing 
Confirmation of what you want to create, delivery date, production schedule, and budget 
↓ &quot;Decide&quot; ↓ &quot;Decide&quot; ↓ &quot;Decide&quot; ↓ &quot;Decide 
Decide what we can make. 
Create a rough image by looking at actual samples and reference materials.
We take pictures of our pop-up materials, 
We will lend you a sample of the actual history. You can use this for your presentation. 
↓ Confirm the details of your budget. 
Confirm details of your budget 
Proceed with NDA and other necessary formalities
See what you have in mind 
Receive PDF file from customer with images and photos 
↓ &quot;Finalize structural design&quot;. 
Finalize the structural design. 
If rough drawings are necessary, draw rough drawings of the structure that can actually be made (4 sheets) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-9.jpg" alt="" />
↓↓ 
Feedback.&quot; 
Decide on a compromise of a few proposals to proceed. 
Wants to use a large photo in a way that is easy to handle and less time-consuming 
Wondered if it could be made into a hardcover cover that could be made in a manufacturing plant 
See a sample of an image made ready-made by the manufacturing 
They are willing to supply us with a cover by mail in one week
White sample production 
We need to rethink the design again if there are any differences from the rough 
I'll think about it before I receive the cover. 
↓↓ 
See the sample of the cover. 
Received a different size cover due to lack of time. 
The size is smaller than the image sample 
Only the size of the movable range of the corner and the way to paste the photo when it is set at 90 degrees are used as reference. 
White is still the original size (10/29) 
Wait for the desired size cover 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-10.jpg" alt="" />
Feedback.&quot; 
Change where changes need to be made 
↓ &quot;White sample production 
White sample production 
↓ &quot;Approval 
Approve. 
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 
Create development drawings for manufacturing quotation 
↓ &quot;Approval&quot; ↓ &quot;Approval&quot; ↓ &quot;Approval 
Manufacturing Estimate 
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 
Update design if there are areas that do not fit in the budget
Create mold data 
↓ Confirmation of manufacturing estimate 
Confirm manufacturing estimate
Graphic design 
Start graphic design according to the mold. 
If there are characters that need to be approved, decide and proceed. 
↓ &quot;Color Sample Production 
Color sample production 
↓ &quot;Fill in the form and picture 
Fill in the shapes and pictures. 
If there is a need to change both the shape and graphics, update and 
Make color sample again 
↓ &quot;Approve 
Approval 
↓ &quot;Approve 
Submit. 
Submit&quot; ↓ &quot;Approval 
Cutting proofs and producing comps 
↓ &quot;Approval&quot; ↓ &quot;Draft&quot; ↓ &quot;Draft 
Approval 
↓Approval 
Progress of production, and proofreading. 
↓ &quot;Production&quot; ↓ &quot;Approval 
Production. 
↓ &quot;Deliver&quot;. 
Delivery.

Production records for photo gift-ready pop-ups

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-10.jpg" alt="" />
Fuji Apollo was bought by the &quot;middle man 2&quot; of Honyaplan. 
(By the way, Watashi is 1)
I wonder if they are making the surface treatment varnish and plate avoiding the product name. 
Or is it printed on top? 
The width of the pattern plate is narrow, isn't it? 
I was talking about this.
Fuji on the Yamanashi side or the Shizuoka side. 
There is no mention of Yamanashi or Shizuoka. 
I thought I would ask someone from Shizuoka about it.
The gouge was too shallow for an Osawakuregake, 
Is it a theory that the gouge was made to look like neither? I was surprised to hear that the gouge was too shallow for an Osawa collapse, 
Fuji and tea fields on the Yamanashi side. 
I'm not sure.
I also received a well-done image showing the Yamanashi side on the left and the Shizuoka side on the right. 
The Yamanashi side is more rugged and mountainous 
The Shizuoka side is more smooth and looks like it's catching the sea breeze.
This Mt. Fuji Apollo's Mt. 
Fuji looks like Yamanashi.
After that, we continued to talk about Mt. 
Fuji from Gotemba, the foot of Mt, 
The thousand-yen bill is also good from Lake Motosu and Lake Kawaguchi.
Fuji to people from Shizuoka, it is very difficult to get a lot of information about Mt. 
Fuji, they will come up with a lot of information about Mt. 
Fuji, even though we have known each other for several decades. 
Fuji, but I wondered if I had never asked him about Mt. 
Fuji, or maybe he had not heard much about it. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-11.jpg" alt="" />
But Shizuoka people say, 
I think people in Yamanashi have stronger feelings about Mt. 
Fuji, so be careful when you talk about Mt. 
Fuji, so be careful when you talk about Mt. 
I see... well...
People in Yamanashi, both people in government offices and people in printing companies, 
I met people from the government, printing companies, ladies at Yukizuri hot springs, elementary school teachers, and so on, 
everyone I met. 
Whenever I asked them something, they would explain it to me, 
I found him to be &quot;a person with a lot of energy, who explains everything at once. 
Maybe this is true not only for Mt. 
If I ask one person 
I have a feeling that I will be able to gather all the information I need...
By the way, I looked at the inside of the package of Mt, 
Fuji Apollo, it says that the motif is Red Fuji.
Oh yeah. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-7.jpg" alt="" />
Well, at first glance, I thought the surface treatment pattern was the same as that of the purple pasteboard of Kikyo Shingenmochi... 
I thought that the pattern of the surface treatment is the same as that of the purple box of Kikyo Shingenmochi... 
(Not that it matters, but if there was a part-time job for manufacturing these boxes, I'd like to go there...)
I see...
I'm sorry. 
I'm sorry for the trouble. 
But I knew you would write it inside.
It's okay. This is, it's Apollo. 
The original moto is about space.
Well, the guy in Shizuoka said 
said, &quot;It should be a picture from directly above.&quot;
Indeed...
By the way, the manufacturing plant is in Hokkaido.
Well, that's all for now. 
Have a good day.

Meiji &#8220;Fuji Apollo&#8221; box and Yamanashi and Shizuoka

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-11.jpg" alt="" />
<h4><a href="https://twitter.com/tdk1986">tdk1986</a>'s &quot;Shogi Piece Polyhedron&quot;.</h4>
I have seen your request to sell them at the Shogi Hall, 
I contacted him and 
I contacted him and decided to make it to such a specification. 
What I mean by &quot;such a specification&quot; is not a one-off piece like a craftwork, but a piece of a certain number of pieces in a group of 1000 or 3000 or more. 
It is not a one-off item like a handicraft, but a certain quantity of 1000 or 3000 or more pieces. 
It is a form that can be manufactured in the same finish and delivered to a large number of people. 
We are looking for a way to produce a certain amount of products with the same finish and deliver them to a large number of people.
<h4><a href="https://twitter.com/tdk1986">tdk1986</a> your blueprints are connected to one another.</h4>
We will figure out how to do this. 
Regarding paper beveling, assuming we don't also reduce the size of the 
Can it be die cut or laser cut for efficiency, 
In terms of the delivery format, the cost of postage, ease of handling and storage at the time of delivery, 
Is there less chance of damage or failure when assembling the product? 
We also consider the workability of the assembly process.
We then developed a puzzle form of six pieces of the same size, arranged side by side, and made it into a puzzle. 
We made a prototype with the cooperation of a printing company, using a special synthetic paper.
This synthetic paper is not susceptible to tearing or peeling, 
(This is not the kind of paper used in elections.) 
It feels secure when assembled, and the crackling is interesting. 
Also, it's waterproof, so it's safe to assemble in the bath. Even if your hands are sweaty. 
It doesn't get squishy even if you hold it with sweaty hands. 
Of course, you can do it with ordinary paperboard. But not in the bathtub.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-12.jpg" alt="" />
You can assemble it from anywhere. But, 
I think it is better to mark the position of the inserts so that you can assemble 
I think it is better to mark the insertion points so that the product can be assembled as shown in the original blueprints. 
I think the shape of the product is finished.
The next step is graphic design, 
The next step is graphic design. 
The next step is the graphic design, which should be a design that makes sense to print. 
An assembly diagram will also be necessary. And packaging. 
When you can see it, you can attack the Shogi Hall. 
I don't mind if we go from the front, 
If anyone has strong contacts in the Shogi Hall, please raise your hand.
By the way, this is the first white sample. 
The original design was hand-held size. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-8.jpg" alt="" /> 
See you next time.

Prototype of product specifications for Shogi piece polyhedron

<h3>How to complete a human skeletal model (mini)</h3>
I will write this article in several parts. 
In addition to the assembly guide, 
I hope you will find these photos useful.
<ul>
<li>
Prepare the tools 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-14.jpg" alt="" /> 
There are some things mentioned in the guide that you may not be able to imagine. 
I'll show you some of the things in the guide that you may not be able to imagine. 
The photo shows my tools, which are quite old. 
Choose the one you think is easy to use. 
From left to right... 
Olfa cutter with auto-lock 
(The blade is a special black blade, small BB50K) 
In-letter remover (for pressing fine creases and crushing burrs) 
Knock-type pen-type wounding needle (for removing small holes) 
1,000-page paper cutter (this is from an unknown manufacturer that my father used, but you can buy one from Amazon, crafts stores, art supply stores, etc.) 
Tweezers (for vine necks)
</li>
<li>
Remove parts from the sheet.
</li>
</ul>
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-13.jpg" alt="" />
The parts are attached to the sheet by a &quot;tuna&quot;. 
If you cut the &quot;tuna&quot; with a cutter and remove the parts 
No pinched edges are left behind. 
Large parts can be torn off with a cutter, but small parts may tear. 
However, there is a risk of tearing small parts. 
Carefully cut off at the point of the chrysalis. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-9.jpg" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-5.jpg" alt="" />
Cleanly pull off the small holes.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-4.jpg" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-1.jpg" alt="" />
All the pieces have been removed.
The sheet has the names of the parts on it. 
Please keep it.
Next time: Skull

Making a human skeletal model (mini) _Preparation 1

<h3>Think of a monthly magazine supplement with millions or hundreds of thousands of copies.</h3>
I had to come up with three such ideas every month. 
I had the job of coming up with three such ideas every month. 
If it was going to stick out, I had to come up with a folded variant on the B5 line, or a B4 variant, and come up with something that would not cause any complaints. 
I would make sure that it would be a &quot;gorgeous 00. 
If there were two magazines, I would come up with six proposals every month, saying, &quot;Oh no, it's the end of the month. 
I would come up with 6 to 10 proposals in a week or two, and then narrow it down to 6 proposals, 6 estimate drawings, and 6 color
samples and 12 white samples.
The 12 white samples are for the reserve and for quotation and production.
Today's inquiry was, &quot;I want to put a pop-up on a B5.&quot;
I'll put the name on it so that I don't forget it. 
I named them so that I don't forget. 
I don't know why the designer of the appendices gave it a strange temporary name, but...
<ul>
<li>One-part popup 
(fan, zigzag, one fan, table)</li>
<li>Heya popup 
(one room, two rooms, three rooms, four rooms)</li>
</ul>

The World of 182×257

<h3>&quot;Pit dwelling model&quot; to understand how buildings work</h3>
<h4>[Children's Science, May 2021]</h4>
(<a href="https://www.seibundo-shinkosha.net/magazine/kids/57662/">https://www.seibundo-shinkosha.net/magazine/kids/57662/</a> &quot;Kodomo no Kagaku May 2021&quot;), &quot;Fun Craft Development Site Kodomo no Kagaku Kenkyujo&quot; is a &quot;pit dwelling model&quot; that shows how buildings work.
The idea is to complete a paper craft that simplifies a pit dwelling so that the general structure can be understood, and then decorate it in a wonderful way.
This is a photo of the prototype. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-17.jpg" alt="" />
There is a little something I didn't write in this magazine. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-14.jpg" alt="" /> 
As shown in this figure, there are various types of pit houses. 
There are three types of pit dwellings: Fuseya A, Fuseya B, and Fuseya C. The model I made this time is a two-story house, 
The model we made this time is a two-stage Fushiya type. 
The model we made this time is a two-stage Fushiya style. 
Four pillars are erected, and beams and girders are placed on the pillars. 
The process of placing, fitting, and tying beams and girders on top of the pillars is called the &quot;Fuseya C&quot; method.
<h4>[pillar+beam+girder]</h4>
Parts.
The part where the side-neck (sasushi) or the ridgepole (munagi) is assembled on top of it,
<h4>[Munegi + roofing material]</h4>
The part where the rafters are put on top of it. 
The part where the rafters are hung,
<h4>[rafters + roofing material]</h4>
Parts.
You can actually use grass for the roofing material to feel the atmosphere of roofing...! 
The roofing material is actually made of grass or something like that! The roofing material was made of grass. 
It seems that not only plants were used, but also soil was used. 
The transparent polyvinyl chloride board of 0.2mm thickness was used, 
The inside of the roof was carefully covered with soil, and when you look up from below, you can see the atmosphere of the inside.
The &quot;furnace&quot; in the center is very important. 
It regulates the humidity and keeps curious animals away, 
prevent the growth of insects and mold. 
insects and molds. 
Besides... The theory that the constant presence of fire may have had a great effect on the maintenance of the mind 
I could really feel the theory that the constant presence of fire may have had a great effect on the maintenance of the mind.
I thought about studying the structure of architecture and the living environment in the olden days, when people began to build their own houses. 
When I examine and think about the architectural structures and living environments of long ago 
I realized that the natural things such as soil, trees, water, temperature, light, darkness, etc., were very close to each other. 
I think it is quite interesting to gradually understand the ingenuity of those times when we were dealing directly with nature. 
I think it's quite interesting to learn about the ingenuity of the people we used to deal with directly.
See you next time.

Kodomo no Kagaku_May 2021_Kodomo no Kagaku Kenkyujo

We have received inquiries from various sources about our &quot;3D Star Map Craft Kit&quot;. Mr. Mitsuo Kanai also found it and wrote a book review? He also wrote a review of the book. Thank you very much.
<blockquote>
This is a rare book that I found in the science and engineering book corner of a famous bookstore in Shinjuku West Exit. It is more like a kit. It is intended for kids, but it is for adults. It is difficult to understand for elementary school students who have no spatial awareness. However, it is an extremely useful kit for adults, who definitely need to be aware of outer space. I went home and started working on it at home. It took me only a few minutes to complete it. (omission) Perhaps the authors are planning to sell the Orionids, other constellations, and the Hyades star cluster in the future, and I would like to imagine that this seemingly maniacal kit will be on the shelves of many bookstores.
</blockquote>
<a href="https://www.astroarts.co.jp/hoshinavi/magazine/books/individual/B07J25F24H-j.shtml">Obsessive Astronomy Book Review: &quot;Three-Dimensional Star Diagram Craft Kit 01: The Big Dipper&quot; - Hoshinavi.com</a>
As the name &quot;3D Star Map Craft Kit 01&quot; indicates, I would like to continue with 02, 03, 87, 88, etc., but I would have to actually make them, and that is where I discovered a big problem. The width and depth of the constellations are so different from each other that it is very difficult to keep them within a certain size.
So, for now, we only have &quot;01 Big Dipper&quot;, but we would like to increase the lineup little by little, so we would appreciate it if you could wait a little longer for the sequel.
If you would like to purchase a large number of copies for a workshop or at a retail store, please contact us using the form. For bookstore purchases, Transview is available. Please feel free to contact us.

Three-dimensional star map craft kit_88

<h3>It's the end of the year already!</h3>
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-20.jpg" alt="" />
Korai no Yuzumakizuke&quot; from Hidaka City, Saitama Prefecture 
A box of one is ready.
The box does not have a folded line on the side. 
The box is not folded on the side, so the image of wrapping paper remains the same. 
The box fits perfectly to the size of the product and is easy to operate. 
We are relieved to hear that the box was well received by the staff.
The graphic design is based on the wrapping paper pattern we had been using. 
the pattern of the wrapping paper we had been using. 
to match the box.
The box is folded when delivered.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-15.jpg" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-10.jpg" alt="" />
Genpo-an &quot;Korai no Yuzumakizuke&quot; (pickled yuzu rolls)
<h4>[<a href="https://genpouan.com/">https://genpouan.com/</a>]</h4>
(<a href="https://genpouan.com/">https://genpouan.com/</a> &quot;Genpoan&quot;)
JA Irumano Hidaka Chuo Direct Sales&quot; will be on sale from 26th 
Hidaka Family Maruhiro&quot; will be on sale from 28th till 12/1. 
New Year's Day, they will also be sold at 2 locations near Korai Shrine. 
1 Approach from Korai Shrine to Seitenin 
2 Across the street from Korai Shrine 1st parking lot on the south side
By the way, if you go to Korai Shrine to pray... 
Prosperity in business and success in life ... I heard that it will make you prosperous in business and success in life..! I heard that.
This is local information, but on New Year's Day, after 9:30 a.m. 
After 9:30 a.m. on New Year's Day, cars will be jammed and the parking lots in the neighborhood will be full. 
It might be a good idea to be on your way home at 9:00 a.m. 
For New Year's Day 2021, it seems that companies and groups are accepting reservations. 
<a href="https://komajinja.or.jp/">https://komajinja.or.jp/</a>
See you soon!

Packaged box of one pickled yuzu roll in Korai

<h4>They said they couldn't get through the instructions, so they pulled out for now.</h4>
Our beginning piano student is a second grader. 
The first piano class I went to when we moved to Kofu... 
I got the feeling that they don't accept people who are out of shape... 
When the teacher told me that I could not follow her instructions, I thought 
I thought it was not a good idea to stay here, so I withdrew from this piano school.
<h4>Music is fun!</h4>
The teacher at the new piano school has a lot of drawers. 
He seems to be strong and good at out-of-form. 
And even if they are children, they use honorifics. 
Let's enjoy music! I could feel his passion for music.
<h4>Make a record book</h4>
This is a big deal. 
I need to make something to follow up on my practice at home. 
I felt that I had to create something that would allow me to follow up on my practice at home, 
I made a record book to show what I practiced little by little every day. 
When I showed it to my teacher, he said, &quot;Wow, this . It's going to sell! 
Okay, it looks like I was right.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-23.jpg" alt="" />
<h4>I actually grabbed it!</h4>
It was a perfect introduction to the piano until I got into the habit of practicing. 
It is a double-song spread, up to 5 times a day, for a week at a time, 
You can record up to five times a day for one month. 
You can use stamps and stickers to record up to 5 times a day for each song.
<h4>No Miss Challenge is also available.</h4>
The last page, 
You can record the number of times you can perform up to 10 times each without making a mistake. 
This is the &quot;No-Miss Challenge Strips&quot; that the teacher gave me on a separate sheet of paper. 
I put them together. 
I will use it before mini-concerts, etc.
<h4>2 times at first</h4>
Since we are starting from a place of no habit at first, we decided to practice only twice. 
When he is able to continue, we will do the number of times he is comfortable with. 
Then, sometimes, there will be days when we do 5 times.
<h4>Sometimes the heat gets to him.</h4>
It's not that I pull 5 times for the purpose of repeating 5 times, 
I just have a day once a week where I can't accept it, so I run it five times. 
I get a fever once a week or so.
<h4>But don't forget.</h4>
The most important thing is to sit down at the piano at a regular time every day 
The most important thing is whether or not you have been able to sit in front of the piano at a certain time every day and touch it. 
Don't get carried away.
Why don't you make a record book at ####
There is a link to a downloadable file at the end of this article. 
It is printed out in black and white photocopy and made in three A4 size sheets.
<h4>Tools to prepare</h4>
<ul>
<li>Glue stick or double-sided tape</li>
<li>Cutters or scissors</li>
<li>Ruler</li>
<li>Cutter mat</li>
</ul>
The solid line in the middle is the cut line. Cut in half.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-16.jpg" alt="" />
Fold the fold line as instructed. 
（Fold the pages as instructed (instructions for &quot;mountain fold&quot; and &quot;tani-fold&quot; are written at the fold line). 3.
<ol start="3">
<li>
glue the pages together, starting with the cover illustration of the cat. 
(The instructions are written at the fold line.) 3. Glue the pages in order, starting from the cover with the cat illustration, and connect the pages in the same order.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-11.jpg" alt="" />
</li>
</ol>
Once the long strip of paper is completed, fold it into a booklet shape. 
Fold the pages so that the edges are aligned.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-6.jpg" alt="" />
<ol start="5">
<li>
finally, paste the glue line on the front cover on the back cover to complete.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-5.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-2.jpg" alt="" />
</li>
</ol>
<h4>Let's Manichi-renshu</h4>
Since there is one book per month, you will be able to keep going forward to a new record book. 
By the time they have accumulated 12 books, they may be able to play the piano without it. 
We hope you will use it with your kids as a companion for their piano practice.
Click here to download ⬇︎
<h4>[Piano Practice Recorder]</h4>
(<a href="https://cdn.shopify.com/s/files/1/0081/8747/8127/files/honyapianolog_A4_ol.pdf">https://cdn.shopify.com/s/files/1/0081/8747/8127/files/honyapianolog_A4_ol.pdf</a> &quot;Piano Brick Recorder&quot;)

Piano Practice Notebook

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-18.jpg" alt="" />
nnOur 2nd grade monitor and plan initiator said, &quot;I want to make a bag that travelers carry.
I thought it might be something like an eastern pouch.
I made a prototype using our company's light gray tenugui hand towel (which has been washed a lot and is not new).
When I asked him if he meant this one, he answered correctly.
I tried sewing without cutting the edges of the cloth.
I have no problem using it for myself. (If I were to give it as a gift or sell it, I think I would fold the edges by 7mm...)
The capacity is about the same as a hot spring set or a large two-tiered lunch box.
I think it is about the size of a medium convenience store bag.
It could also hold books or plastic bottles.
By the way, a traveler's luggage compartment is probably
There are two groups of people who used to walk around with this tied to a branch.
or a spiral stitch, or a furoshiki wrapped around like a spring roll.
or tied around the chest (I wonder if this is also the case with the ninja).
For townspeople, two square pieces of luggage made of bamboo, tied together with a string, divided into front and back, and slung over the shoulder.
It would be interesting to see how they would use them.
There are various designs of tobukuro, but this one, which can be made with three folded tenugui towels
I think it's great because it requires fewer steps and is usable in the shortest course.
<img decoding="async" src="https://wiki.honya.dev/api/attachments.redirect?id=d0486af5-3ab8-471c-98da-98b0f03baa51" alt="" />

I made an east bag with Tenbundai Tenugui.

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-2.png" alt="" />
Recently, the National Astronomical Observatory item &quot;designed only the Kanji part of the logo&quot;
T-shirts (white) with &quot;only the Kanji part of the logo&quot; of National Astronomical Observatory of Japan items have been selling well.
I don't know why.
I don't know why! Why the Kanji characters in white!
I am not sure why. n
There may be a few left at the University of Tokyo Co-op on Mitaka Campus, but
our stock will run out already.
We can deliver XL and S sizes for now, but
but we will not be able to deliver M and L sizes anytime soon.
It will be summer and we will manufacture additional products.
Please wait a little longer.
(By the way, navy is also available...)

National Astronomical Observatory of Japan Kanji T-shirt (white)

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-20.jpg" alt="" />
TMT Paper Craft Prototype White Model from National Astronomical Observatory for distribution and workshop purposes.
Inquired about paper craft production for the purpose of distribution and workshop.
The company has been providing us with the production cost, and we have started production since 2013.
The actual design of the TMT telescope itself was still in progress and had not been completely decided, so there were no 2-D blueprints.
With the cooperation of the National Astronomical Observatory of Japan (TMT Promotion Office at that time), we were able to view 3D graphic data for demonstration purposes.
Production proceeded based on other materials related to the TMT from the National Astronomical Observatory of Japan.
(Any changes or corrections were made directly from NAOJ.)
Only a small number of copies were produced using on-demand printing and on-demand cutters.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-21.jpg" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-3.png" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-4.png" alt="" />
I started working on the styrene version right after this.
I did not take any images of assembling this sheet and will reproduce them in the next article.
(I have permission from the TMT project to reprint and manufacture this piece.)

TMT paper model

The Yamanashi Prefectural Library has a &quot;Yamanashi Related Materials Corner&quot; that I was curious about.
I decided to look for materials on the 100 most famous mountains in Yamanashi.
I stepped into this corner for the first time with a purpose.
Then I came across this donated book.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-22.jpg" alt="Our Yamanashi&quot; by Yamanashi Prefecture Elementary and Junior High School Social Studies Research Group" />
I'm wondering if this color-coded map is a city or not.
It looks like a more deep-rooted one.
It suddenly hits me with a thud.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-23.jpg" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-24.jpg" alt="" />
It's different from the others&quot;, &quot;Fujimi-no-Tani&quot;, &quot;Bonchi wo Mukimasu&quot;, nn.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-25.jpg" alt="" />
Yamanashi is surrounded by strong enemies.
The ▲ mark on &quot;Fuji-san&quot; is just barely in Yamanashi Prefecture.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-26.jpg" alt="" />
The box the woman is packing the peaches in is a wooden box, not cardboard.
!!<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-27.jpg" alt="" />
A woman was using a stepladder to put harvested peaches in a basket.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-28.jpg" alt="" />
Pictures of women taking care of silkworms as well.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-29.jpg" alt="" />
Someone looks like an uncle, but I'm a little unsure.
!!<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-30.jpg" alt="" />
A woman working on a weaving machine for manufacturing.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-31.jpg" alt="" />
Woman making stamps.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-32.jpg" alt="" />
I'm a woman who does all the calculator manufacturing work too.
Are there things in life that women are better suited or more convenient to do?
What was going on inside each family?
Did aunts and grandmothers take care of the children?
By the way, as of 2023.
The &quot;community work&quot; is the work of uncles.
It is the uncles who gather at the community center. Uncles are called out at festivals and as the head of a clan.
After the festival, it is also the uncles who go to the MUJINKAI.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-33.jpg" alt="" />
And.
I am struck by these concluding words.
West Tokyo.&quot;
I've seen titles like &quot;First Things First, Yamanashi&quot; earlier on this page.
It was a very interesting title.
I imagine that he was hit by this in the fourth grade, and his love for his hometown was completely shattered.
I imagine that people around my grandfather's age today were cut down to the core of their love for their hometown.
Seriously.
This is bound to cause the young people to leave.
It means that not one of the 22 principals who made this book thought, &quot;That's not right.
I see. So that's how it is.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-34.jpg" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-35.jpg" alt="" />
I would like to introduce Akitsugu Asakawa as
Try a search...
National Diet Library, &quot;Schools in Yamanashi,&quot; &quot;Evacuation of School Children in Yamanashi Prefecture,&quot; &quot;Yamanashi no Gakko Koto Hajime&quot; n<a href="https://iss.ndl.go.jp/books/R100000002-I000002327108-00">https://iss.ndl.go.jp/books/R100000002-I000002327108-00</a>
Bulletin of the Hui Enkai, Faculty of Education, University of Yamanashi, No. 47n<a href="https://www.ccn.yamanashi.ac.jp/~kitenkai/kaihou/kaihou_No_47.htm">https://www.ccn.yamanashi.ac.jp/~kitenkai/kaihou/kaihou_No_47.htm</a>
Webcat Plus &quot;Schools in Minamikoma&quot; and &quot;Schools in Kofu
<a href="http://webcatplus.nii.ac.jp/webcatplus/details/creator/174314.html">http://webcatplus.nii.ac.jp/webcatplus/details/creator/174314.html</a>
It will be interesting to see what textbooks our fourth grader will be distributed next year.

Our Yamanashi

It's been a little while since drawing AI was unleashed on the world.
I wanted to see something I could not imagine as much as possible.
I wanted to see what I couldn't image as much as possible, and &quot;convert the image to text and output it&quot; was one step.
But I managed to use it.
I have a visual that properly breaks down or ignores the image.
I thought it was interesting that the output was so fast.
To AI's &quot;stock of what humans have thought so far&quot;,
I put something that I have created, which I have not made public, on the AI's &quot;stock of what humans have thought so far.
It can be destroyed in a good way.
It is similar to putting a ball of paint in a box and shaking it around.
(But it still ends up looking somewhat &quot;that way&quot; like something I feel I know how to do.)
And then, when I look at the disassembled and reconstructed thing...
I feel something strange.
I want to cherish that strange feeling, so I fix it as it is.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-36.jpg" alt="" />
This is a drawing based on an AI-generated image from a photo of a past exhibit.
There were printers, messed up papers, machine parts, typewriters, and many other things.
There are blinded windows, blackout curtains, desks, a small kitchen, and so on.
I saw a window with blinds, a blackout curtain, a desk, a small kitchen, an easy chair, and so on,
It doesn't have a shape, or it doesn't matter what it is, but there is such a room. It is a room like that.
I thought it might be a good idea to make it into a T-shirt, so I did it.
I ordered some samples from a website that makes a variety of T-shirts.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-5.png" alt="" />
I'd like to draw a ground spider web or something next, but I might not like the idea of wearing it.

Drawing AI Shirt

<h3>I have been using the &quot;perforation&quot; on the box of masks sold by the box.</h3>
I have never allowed a single day to go by.
I have not forgiven for a single day, but I suddenly couldn't forgive it now, so here it is.
This is.
&quot;If you cut it off and drill a hole in it, you can use it like a tissue.&quot;
&quot;You guys can do that, right?&quot;
You guys can do that, can't you? 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-25.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-18.jpg" alt="" />
Cutting and opening with a cutter carefully along the sewing machine is
It's inexcusable, you idiot, this fake kind of sewing machine.
I used it without drilling holes.
When the contents were getting low, this was also a good idea.
Every time I take it out, I waste energy.
You think you can't do it with all the boxes.
I use this one every day, so it's the worst of the worst.
I am trying to create a comfortable and peaceful world.
The following is what I made by the reaction and reflection of Muri.
<ol>
<li>
first, cut off this unmotivated surface. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-13.jpg" alt="" />
Suck it up, haha. I'm so sorry, but I'm not going to do it. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-7.jpg" alt="" />
</li>
<li>
make a cut at the solid line in the figure below.
</li>
</ol>
The dotted line is the fold line of the uncut side of the lid. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-6.jpg" alt="" />
Fold outward from the base at the cutout position. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-3.jpg" alt="" />
<ol start="4">
<li>cut the insert into a V-shape.</li>
</ol>
You are useless, too, and you will be defeated. You are useless! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-1.jpg" alt="" />
Cut diagonally at the black line shown below. (on both sides)
The flaps in the way on the left and right sides are also terminated together. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-1.jpg" alt="" />
<ol start="6">
<li>
fold inside the box in the direction of the arrow. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-1.jpg" alt="" />
</li>
<li>
completion.
</li>
</ol>
To remove, hook your finger in the V-shaped cut hole and open the lid. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0010-1.jpg" alt="" />
Very satisfied.
That is all.
This should make the world a little more peaceful.
(Any manufacturer interested in developing the design, please let me know)
See you next time.
Have a good day.

box of masks

<h3>&quot;Action Painting&quot;</h3>
This time, a desktop action painting device. 
Continuing from the previous issue, this is an impractical motif.
I would like to make an excuse from the beginning. 
Personally, I have no illusions about art and artists, such as enjoying dramatic or magical mysteries. 
I personally have no illusions about art and artists, such as enjoying dramatic or magical mysteries. 
(I am not trying to give them a sparkling or smelly finish.) 
(I'm not trying to make it sparkle or smell nice. 
I think that if I use words like &quot;coincidence&quot; or &quot;unexpectedness&quot;, sincere contemporary artists will be offended.
Now, let's see... 
Here is what you can see in this magazine. 
(You can enlarge the development by 200%.)
Why is only half of the outer cover made of paper? 
At first, I used transparent vinyl chloride board for the whole thing, but then I thought it would be hard to tell that it was transparent. 
But since this magazine is in black and white, I thought it would be difficult to see if it were transparent. 
If you want to enjoy taking pictures, you might try making it out of paper. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-26.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-19.jpg" alt="" />
The next picture is, well, a transparent prototype. 
Except for the wheels, knobs, and washers 
all made of transparent vinyl chloride board. 
The paint tray is wrapped in aluminum foil for testing to prevent paint leakage. 
(If the development drawing in this magazine is enlarged to 400%, it can be made in this size.)
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-14.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-8.jpg" alt="" />
Putting paint in the paint tray.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-7.jpg" alt="" />
The outer cover is set in place. 
The outer cover is set in the gap between the bottom cover and the paint tray.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-4.jpg" alt="" />
It appears to float... The height of the paint tray is adjusted by laying down cardboard.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-2.jpg" alt="" />
The place where I turned it.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-2.jpg" alt="" />
This is what it looks like when you open the top lid. 
I hope you enjoy the safe evilness of this device.
<h4>[extra]</h4>
Idea sketch. Wraps, trays, different paper positions, etc.... 
The fact that the editorial staff sees this and gives the go-ahead 
I feel like I'm walking on a knife-edge. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-2.jpg" alt="" />
See you next time.
The article and the development diagram are in the May 2022 issue of Children's Science. 
Please be sure to purchase a copy.

Kodomo no Kagaku_May 2022_Kodomo no Kagaku Seisakujo

<h3>&quot;Confetti pump&quot;</h3>
<h4>[Children's Science, November 2021]</h4>
(<a href="https://www.seibundo-shinkosha.net/magazine/kids/66727/)&#039;s">https://www.seibundo-shinkosha.net/magazine/kids/66727/)'s</a> &quot;Fun Craft Development Site Kodomo no Kagaku Seisakusho&quot; is &quot;Paper Blow Pump&quot;. 
The paper is used to make a three-dimensional bellows structure. 
The folding process is quite difficult, but don't give up and try to complete it! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-34.jpg" alt="" />
Do your best not to lose heart during the folding process! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-24.jpg" alt="" />
This is a picture before gluing the transparent PVC board. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-16.jpg" alt="" />
It is interesting to see how it flies like popcorn when you put a ball of tissue or copy paper in it in addition to confetti. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-10.jpg" alt="" />
By the way. 
You may try to make the enlargement of the copy larger (smaller) than specified in the journal.
Oh, I see... When it's bigger (smaller), it means 00... 
I see...the shape here has to be that shape... 
I hope you will try it. 
I hope you will give it a try.
See you next time.

Kodomo no Kagaku_Nov. 2021_Kodomo no Kagaku Seisakujo

<h3>The 1st FemTech Tokyo</h3>
(October 21, 2022)
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-28.jpg" alt="" />
From the person in charge of our business partner 
We are pleased to inform you that we will be unveiling our renewed product line. 
Exhibition where you can meet companies that support &quot;health&quot; and &quot;activity&quot; of women 
I went to the &quot;1st <a href="https://www.femtech-week.jp/hub/ja-jp.html">FemTech Tokyo</a>&quot;. 
Since we were working only online and by mail, we were not able to meet the person in charge for the first time. 
This was my first opportunity to meet the person in charge.
**The 1st FemTech Tokyo***.
<ul>
<li>Dates 10/22(Thu) - 22(Sat), 2022 10:00-17:00</li>
<li>Venue Tokyo Big Sight, East Hall 7</li>
<li>Organizer RX Japan K.K.</li>
<li>
Exhibitors 200 companies
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-20.jpg" alt="" />
</li>
</ul>
I visited on a weekday, a business day for companies. 
I arrived just in the morning.
<h4>FemTech is a...</h4>
Female+Technology : &quot;FemTech refers to products and services that can solve various issues in women's life stages such as &quot;menstruation/menstruation,&quot; &quot;fertility/pregnancy,&quot; &quot;pregnancy/postnatal period,&quot; and &quot;premenopause/menopause,&quot; and is said to be a 5 trillion yen market by 2025.
<a href="https://www.femtech-week.jp/hub/ja-jp/about/about_fem.html">FemTechTokyo</a>
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-15.jpg" alt="" />
First point of consideration for this unveiling visit
<ul>
<li>How is it displayed?</li>
<li>How will people react when they come to see it?</li>
<li>What kind of companies and products are there?</li>
<li>Is there anything I might be able to do?</li>
<li>
What can I learn from this exhibition?
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-9.jpg" alt="" />
</li>
</ul>
I'm going to start looking around right away. 
I have no idea where to stop. 
I had no idea where to stop by. 
At any rate, I went to the booth of a customer!
<h4>Kawaii~!</h4>
We were able to meet and greet the person in charge of the booth. 
We were also able to take pictures of the product display.
Everything looked wonderful with a very bright atmosphere.
!!<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-5.jpg" alt="" />
When you first contacted me about the project. 
I was not surprised at anything that came my way. 
I was shocked after a long time because of the strong impact of the product.
Some of the clinicians who visited our booth said 
&quot;Wow, this is a great era...&quot; and &quot;Wow, this is a great time...! 
The clinic staff who visited our booth were also shocked.
We designed and redesigned this 
The white holder shaped like a flower or a bird that holds the paper cups. 
It is a white holder shaped like a flower or a bird.
<h4>[Product website].</h4>
<a href="https://babylife-lab.com/products/meeta%20" title="meeta">https://babylife-lab.com/products/meeta</a>
<a href="https://babylife-lab.com" title="Baby Life Institute">Baby Life Institute</a>
<h4>Take a tour around the venue</h4>
I don't know what it's like just by looking at it. 
I will start with the ones that interest me and ask, &quot;What's this? 
I will start with the ones that interest me and ask, &quot;What's this? 
I was impressed by many of them. 
I was impressed by many of the exhibits. 
I saw exhibits not only from all over Japan, but also from Korea and other countries.
Anyway, I would like to ask what women can do to make their &quot;painful things&quot; more comfortable and solve their problems. 
I will do whatever it takes to make them comfortable and solve their problems! 
The energy of the women was explosive.
(This is the atmosphere of other companies' booths.)
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-3.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-3.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0010-2.jpg" alt="" />
Roughly, what kind of things were there?
<ul>
<li>Clothing, including underwear</li>
<li>Beauty and health food related items</li>
<li>Fertility items</li>
<li>Online pill prescriptions</li>
<li>Nursing care products</li>
<li>Controlled medical devices</li>
<li>Regenerative medicine related</li>
</ul>
I want to alleviate my physical discomfort. 
To prevent major health problems from occurring 
I want to maintain my health and seek comfort. 
&quot;I want to be able to do things that used to be difficult with ease and comfort. 
... You are working on these things, aren't you? 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0011-1.jpg" alt="" />
Top 3 things I've never heard of before.&quot;
<ul>
<li>Things that when you breathe on them, you know you have a risk of breast cancer</li>
<li>Female external catheters</li>
<li>A kit to test and analyze intestinal flora (intestinal microflora)</li>
</ul>
Things that I personally care about. 
There is one that is expensive but inexpensive. 
I was curious about such a thing, so I wrote it down. 
It seems to be comfortable.
Magnesium sulfate bath salts that are absorbed into the skin
Dedicated mugwort steaming set
It was interesting to see the variety and range of problems. 
From the ones that we are trying to solve the problems that are really bothering us 
to those that are not so much a problem, but something that will help you a lot. 
but not so much that it's a problem, or that it will be very easy, or that there are things that are comfortable, etc. 
There were quite a variety of types and ranges.
So many of the designers are uncles. 
Many of the people involved in paper container design are men.
Also, if you don't combine the out-of-shape design areas. 
It can become boxy or just functional.
In the production process, there are people who say, &quot;I'll do both design and practical design, 
I think it is difficult to find people who are willing to do both design and practical design at the same time. 
It is also difficult to find people who are willing to do both design and practical design at the same time.
In this case, I happen to be a woman, and I think I was just the right person for the job.
See you next time. 
I heard that there will be a second FemTechTokyo.

1st_FemTech_Tokyo

<h3>Summer 2021, Honyaplan learned of &quot;Space Beer&quot;.</h3>
<a href="https://uchubrewing.com/">https://uchubrewing.com/</a> 
In Hokuto City, Yamanashi, Japan 
We are aiming for a fun, love &amp; peace world with hops and craft beer 
and that it will be a great success!
<a href="https://uchubrew.shop-pro.jp/">https://uchubrew.shop-pro.jp/</a> 
Oh, webshop is sold out!
It's delicious and 
And the explanation on the label? is a little bit crazy, so I support it. 
I support it. 
Well, people read this when they are drunk or about to be drunk. 
Or, people who are trying to get drunk read this. 
But this is serious. 
I'm sure this guy likes wrestling. 
Textual descriptions such as labels are the area where the production is the most shaky, but the free space is the area where we don't waste a single drop. 
But the free space is used without wasting a single drop, and I think it's a good idea. 
This is the wording of the triple IPA. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-29.jpg" alt="" />
I just had an empty bottle of METATRON 
to cover the bottle neck sample. 
I took a picture of it. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-21.jpg" alt="" />
I just wanted to try it. 
I know that I should use waterproof paper in such a case. 
I know what I'm doing, so please leave me alone.
I mean, coasters are made of paper, too...
They have a deep feeling of nostalgia, even if they absorb water...
Then I just found out. 
There's PDF data for promotional tools!&quot; 
<a href="https://uchubrewing.com/tool/">https://uchubrewing.com/tool/</a> 
UCHU Brewing logo is ai available! 
Oh wow... 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003.png" alt="" />
I'm so excited. 
See you next time.

What is Space Beer?

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-30.jpg" alt="" />
Thank you for visiting our website.
Honyaplan is from Fuchu City, Tokyo.
Kofu City, Yamanashi Prefecture.
We have a larger house and work space, and more cats.
We look forward to working with you in the future. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-22.jpg" alt="" />
(The photo shows Mt. Fuji in the morning just before the start of the rainy season and the sea of clouds from the fifth mountain.)
The move was made in April.
The environment has birds of prey fighting in the air and mountains in all directions.
You can even catch a glimpse of the tall mountains in the sky in a little alley.
This allows us to replenish our YP (mountain power) frequently.
And yet there is a convenience store.
It's a 15 or 30 minute drive, or a day's walk, and you'll be in the mountains in no time!
Looking forward to fall...

Honyaplan has moved to Kofu.

<h3>Today, my son, who is now 5 years old, asked me to make him a</h3>
A remote-controlled mug. 
I'm uploading a hand-drawn image of the development.
I think he was 4 years old when he requested. 
He is not able to wait patiently. 
It should be done in about 5 minutes. 
I made it at a super evolutionary speed. 
He kind of cherished it and it is still there. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-31.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-23.jpg" alt="" />
This is the expansion. 
<img decoding="async" src="//cdn.shopify.com/s/files/1/0081/8747/8127/files/IMG_0385_large.PNG" alt="" /> 
<img decoding="async" src="//cdn.shopify.com/s/files/1/0081/8747/8127/files/IMG_0383_large.PNG" alt="" />
Like this kind of Katsuhiko Hibino. 
I enjoy making &quot;paper crafts that look like clay&quot; like this one by Katsuhiko Hibino. 
It would be interesting to make a lot of mug series.
Oh, I haven't drawn how to make ver.1.
See you next time.

Craft in about 5 minutes_Remote-controlled mug

<h3>&quot;Kodomo no Kagaku&quot; (Science magazine for elementary and junior high school students), published by Seibundo Shinkosha</h3>
Coca-net! Summer Special Site 
<a href="https://summer.kodomonokagaku.com/">https://summer.kodomonokagaku.com/</a>
During the month of August, exciting science contents and 
and free research contents are updated every day during August. 
Honyaplan's &quot;Create with Cardboard! One of Honkaku Secret Base Crafts&quot; by Honyaplan 
Triangle-shaped Secret Base&quot; is one of the &quot;Honkaku Secret Base Crafts&quot; by Honyaplan.
This base is modeled on the Tipi, a mobile dwelling of the American Indians. 
Moomin's Snufkin uses a light zelt or a tipi. 
It seems that it depends on the version of the drawing. 
(We also made a zelt model, but it is not included in the contents this time.) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-35.jpg" alt="" />
Speaking of things you can do with cardboard... 
Decorate it with grass, branches, stones, cicada shells, paint, etc! 
→It's so cool. 
The gluing method is...
Use wood glue, duct tape, double-sided tape, etc.
(2) Make two holes in each side and tie them together with a band.
Then 
I would like you to try stringing strings to make sounds and putting in speakers. 
When summer is over and fall comes and winter comes... 
I would like you to make it fuzzy with autumn leaves and dead leaves. 
It would be wonderful to make a three-dimensional gallery with photos.
It's a bit heavy, but I think it would give the impression of having been made. 
See you next time.

Children&#8217;s Science in August 2020 is an online festival! Coca-Net! Summer Special Site&#8221;

<h3>Let's make a &quot;Trash Can Man&quot; out of cardboard.</h3>
If you put a plastic bag in a trash can you bought at Daiso or some other store, the plastic bag sticks out from the head of the trash can. 
the plastic bag sticks out from the head of the trash can. 
That's not so cool, right? 
I saw something a few decades ago that suggested putting the entire trash can in a basket or another box. 
I remembered seeing something about this decades ago. 
So I tried it with a cardboard box I had lying around. 
Yeah, it looks good.
But my 8 year old said, &quot;It's hard to tell it's a trash can! He said, &quot;It's hard to see that it's a trash can! 
I said, &quot;Okay, I'll make it easier to understand.
So, here we are.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-4.png" alt="" />
Like! I got a thumbs up for the target. 
I'll put my arm on the side too. I said, &quot;Let me hold an ice cream stick or a mask. 
He said, &quot;Let me hold an ice cream stick or a mask.
So here we are.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002.png" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-1.png" alt="" />
This is probably a good idea.
200% influenced by Akira Toriyama due to reading too much of Arale-chan.
It's quite a fun way to get rid of trash, so please give it a try. 
I'd like you to give it a try.
See you next time.

Let&#8217;s make a &#8220;Trash Can Man&#8221; out of cardboard!

<h3>I ordered an IKEA product because I was told that I could buy small items by mail order.</h3>
When I received it, I was surprised to find that it was a very oversized packaging. 
Am@zon's &quot;big box&quot; seems to be cute. 
The order included a lot of breakables such as tableware and other small items, 
I had to send them over the mountains to Kofu.... 
I could hear the staff saying, &quot;Oh my God! I could hear the staff saying, &quot;Oh my God!
I'll just mention one thing. 
The next picture shows a glass container for oil 
The next picture is a glass container for oil. 
See also the size ratio with the makkie. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-36.jpg" alt="" /> 
Since it is wrapped in a curly roll 
At first, I had to unwind and reverse the winding until the product came out. 
But since everything is the crucible packing method, there is no end in sight. 
I bought about 10 of these, I think.
Yes, everyone who bought oil containers! 
Push it out toward the top and bottom! 
(It doesn't just pop out. (It doesn't just pop out. It's more like millimeter by millimeter.) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-25.jpg" alt="" /> 
I got it. I got it. 
If you don't need packing material, you can just crush it up and put it out on 
If you don't want the packing material, you can just crush it up and put it out on the day for recycled paper or miscellaneous paper. 
[]() <a href="https://wp.honya.dev/wp-content/uploads/2023/09/0003-17.jpg"></a> 
The kraft paper packing material that you stretch out produces paper dust. 
And the cross section of the paper touches the paper, so I wonder if there is concern about scratching the paper. 
The white thin paper is wrapped around the package in two layers with the white thin paper inside. 
All the breakable items came &quot;wrapped in a circle&quot;. 
Even glasses in a thin cardboard box were packed in a box.
Oh no... 
Wouldn't it be better to ask someone who specializes in cardboard packing structure to do this? 
Also, the outer cardboard box is so thin that it should be multi-tiered.
This packing material is interesting, but why use double-tier like this here again... 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-11.jpg" alt="" />
Good luck with IKEA mail order! 
Using paper doesn't mean you're sustainable. 
(The products themselves are nice! Yellow hand towels are cute!)
IKEA online store 
<a href="https://www.ikea.com/jp/ja/">https://www.ikea.com/jp/ja/</a>

IKEA mail order packaging

<h3>To grade 1, explain the clock (part 1).</h3>
Good morning. 
It's snowing and it's a refrigerator! 
I haven't gone and seen it yet, but Takeda-dori is wearing light crampons.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-37.jpg" alt="" />
This time, I felt that the &quot;homework on how to read a clock&quot; in the first grade was not interesting at all, and I was not motivated to do it at all. 
I'd like to write a few thoughts for all the kids in the world who feel that the &quot;how to read a clock&quot; homework 
I'd like to write a few thoughts for kids all over the world who feel that the &quot;how to read a clock&quot; homework in the first grade is not interesting and they are not motivated to do it at all.
The enemy is this.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-26.jpg" alt="" />
This probably has an atmosphere that nothing has changed in the approach for 50 years. 
It's the same one type of fill-in-the-blanks quiz, and that's all you need. 
The amount of questions is unimportant, and it's a formula that you have to practice repeatedly. 
It's exactly the same way of making addition and subtraction problems. 
I wish they would insert some kind of explanation from a different angle. 
You don't have to do the same kind of problems in print. 
Is there any way to make it look like &quot;bang, bang, bang&quot;?
Yes, I do. 
How about this? I'll introduce them in several parts, 
I'll introduce them in several parts.
How about we make the &quot;minute&quot; and the &quot;hour&quot; look different. How about this?
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-18.jpg" alt="" />
The back side looks like this. It's held in place with split pins. ↓↓
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-12.jpg" alt="" />
You can stack the disparate pieces and re-pin them with a split pin. 
So the layers of minutes and hours merge.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-8.jpg" alt="" />
This is a bit of a side-track, but 
I sometimes see problems that say &quot;make your own problem&quot;... 
First of all, you should make an interesting problem. 
Also, explain to me how to make a problem.
That's enough for today. 
Next time 
&quot;Clock with Depth 
Flower Shape 
Straight clock

To grade 1, explain the clock1

Example 1) 
A final client who has an idea of what he wants to do.
If you are working with another company, and
subcontracting company,
We will receive a proposal that includes the following information about what you want to make.
We will confirm the details of your budget, and also go through the necessary rules and regulations, such as NDA, in advance. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-38.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-27.jpg" alt="" /> 
Once we have received such a proposal, we will not only look at the appearance of the product, but also 
with a design that also addresses cost and manufacturing issues. 
We can make samples for presentation.
Example 2)
If you are in a position of decision-making authority and make a request directly to us 
The following is an example of a request from a person in a position of decision-making authority directly to us.
Contact us. 
You provide us with a brief overview by email or phone 
↓ (to be followed by a phone call or email) 
Hearing 
Confirmation of what you want to create, delivery date, production schedule, and budget 
↓ &quot;Decide&quot; ↓ &quot;Decide&quot; ↓ &quot;Decide&quot; ↓ &quot;Decide 
Decide what we can make. 
Create a rough image by looking at actual samples and reference materials. 
↓ Confirm the details of your budget 
Confirm details of your budget 
NDA and other necessary procedures
See the customer's image 
Get a clear image from the customer 
↓ &quot;Finalize structural design&quot;. 
Finalize the structural design. 
If a rough drawing is necessary, draw a rough drawing with a structure that can actually be made.
<img decoding="async" src="https://minioapi.honya.dev/www.honya.dev/HonyaPla/HonyaPla-0025/0003.jpg" alt="" />
↓ &quot;feedback 
Feedback 
Finalize the shape of the object to be made 
↓ &quot;white sample production 
White sample production 
Rethink the design again if it is different from the rough design 
↓ &quot;Feedback 
Feedback 
Change what needs to be changed 
↓ &quot;Feedback 
White sample production 
↓ &quot;Approval 
Approve. 
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 
Create development drawings for manufacturing quotation 
↓ &quot;Approval&quot; ↓ &quot;Approval&quot; ↓ &quot;Approval 
Manufacturing Estimate 
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 
Update design if there are areas that do not fit in the budget
Create mold data 
↓ Confirmation of manufacturing estimate 
Confirm manufacturing estimate
Graphic design 
Start graphic design according to the mold. 
If there are characters that need to be approved, decide and proceed. 
↓ &quot;Color Sample Production 
Color sample production 
↓ &quot;Fill in the form and picture 
Fill in the shapes and pictures. 
If there is a need to change both the shape and graphics, update and 
Make color sample again 
↓ &quot;Approve 
Approval 
↓ &quot;Approve 
Submit. 
Submit&quot; ↓ &quot;Approval 
Cutting proofs and producing comps 
↓ &quot;Approval&quot; ↓ &quot;Draft&quot; ↓ &quot;Draft 
Approval 
↓Approval 
Progress of production 
↓ &quot;Production&quot; ↓ &quot;Approval 
Production. 
↓ &quot;Deliver&quot;. 
Delivery.
That is all.

How the product is made1

<h3>Continuing with the miniature human skeletal model.</h3>
<ul>
<li>Make a skull ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-39.jpg" alt="" /> 
Mini uses tweezers from the very first insertion!</li>
</ul>
Sewing machine half-cut in the fold position ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-28.jpg" alt="" /> 
This is the back side. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-19.jpg" alt="" /> 
Open the slit a little with a piece of parchment paper. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-13.jpg" alt="" /> 
Insert it to the left and right. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-9.jpg" alt="" /> 
Fold it down. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-6.jpg" alt="" /> 
Fold up 
The paper is a bit stiff because of its thickness. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-3.jpg" alt="" /> 
The face is attached! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-4.jpg" alt="" /> 
Next part to use 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-4.jpg" alt="" /> 
Actually, it doesn't matter where you start. 
There should be a place you are comfortable working from ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0010-3.jpg" alt="" /> 
The smallest part should be facing you so that you can see the picture from the back! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0011-2.jpg" alt="" /> 
I'm working on it by tilting it down and flattening it a bit. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0012.jpg" alt="" /> 
The claw on the top of the head is locked in the slit. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0013.jpg" alt="" /> 
The lower jaw piece should be rolled up. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0014.jpg" alt="" /> 
Knocked down flat and folded with tweezers ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0015.jpg" alt="" /> 
(This folding part, might be easier to do first) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0016.jpg" alt="" /> 
Bond the part of the face that opens up! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0017.jpg" alt="" /> 
Use tweezers to hold it down a little. 
[]() <a href="https://wp.honya.dev/wp-content/uploads/2023/09/0018.jpg"></a> 
It's done!
If you use glue, the position of the glue may not be right.
but the good thing is that there is no such problem when you make it with &quot;Sashikomi&quot; method. 
Also, it can be redone.
Next time: Sternum + Rib Cartilage

Making a human skeleton model (mini) _ Part 2: Skull

<h3>Paper Products Detective Chocolate Fusion packaging</h3>
Wednesday, January 25, 2023
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-42.jpg" alt="" /> 
Overall picture
No rich coating varnish or anything. Crumbly. 
Paper is, of course, foreign and messy. When I hit on this type of paper, I always wish there was a &quot;World Paper Brands and Samples Collection&quot; or something like that. 
I always wish there was such a thing as a &quot;collection of paper stocks and samples from around the world&quot;.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-29.jpg" alt="" /> 
Opening (where it is supposed to be)
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-20.jpg" alt="" />
Opposite side of the opening
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-14.jpg" alt="" />
Check the structure of the opening.
<ul>
<li>Only a slit in the middle of the face</li>
<li>No fold, no perforation</li>
</ul>
There is no perforator, but you can open it by putting your finger on the slit. 
and tear it open. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-10.jpg" alt="" />
Opening the package
I'm not sure if &quot;tear it open&quot; was the right answer. 
If it was correct, it would be one more world of opening the package. 
I'm excited! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-7.jpg" alt="" /> 
Remove contents 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-4.jpg" alt="" /> 
contents ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-5.jpg" alt="" /> Contents 
Biscuits, not cookies 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-5.jpg" alt="" /> 
Resealing
<ul>
<li>The protrusion can be torn open and inserted into the cut. 
(The way to open it is &quot;there is no perforation or anything, but pull and tear it open&quot;. 
　(I guess it was no problem to open it by &quot;pulling and tearing, though there is no perforation&quot;)</li>
<li>
Designed to be resealable.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0010-4.jpg" alt="" />
</li>
</ul>
Inside 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0011-3.jpg" alt="" />
The name of the product is not quite clear.
On the back: &quot;Chocolate Fusion&quot; (white chocolate biscuit)
Name: Chocolate.
It is not a chocolate candy.
Chocolate confectionery is a &quot;chocolate product in which chocolate dough accounts for less than 60% of the total weight and is combined with other ingredients such as nuts and cookies.
Product name: Original Gourmet cookies&amp;cream fusion chocolate fusion (white chocolate biscuits)Country of origin: TurkeyIncluded quantity: 102gImporter: Eurus Corporation (Kanagawa, Japan)

Paper Products Detective &#8211; Chocolate Fusion Packaging

<h3>&quot;Greeting Ornament&quot; made with folding dodecahedron</h3>
<h4>[Children's Science, January 2021]</h4>
(<a href="https://www.kodomonokagaku.com/magazine/)&#039;s">https://www.kodomonokagaku.com/magazine/)'s</a> &quot;Fun Craft Development Site: Kodomo no Kagaku Kenkyujo&quot; is &quot;Greeting Ornaments Made with Foldable Dodecahedrons&quot;. Polyhedrons are made using package design techniques. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-43.jpg" alt="" /> 
The point of this project is &quot;It should be a dodecahedron when assembled.&quot; 
This is the point of this project. 
A pop-up picture book, a box of candy, or a toolbox sold at a home improvement store, 
You can see it in pop-up picture books, candy boxes, and toolboxes sold at home improvement stores. 
This is the &quot;folding method&quot; seen in pop-up picture books, candy boxes, and tool boxes sold at home improvement stores. 
It is a way to reduce the size of products to be mailed to a store or other location. 
to reduce shipping costs as much as possible. 
To keep the size of a book within a specified size, or to make it as small as possible. 
It is a small device that can be seen in industrial products. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-30.jpg" alt="" /> 
This is before assembly. 
It is a large space, so we use it conveniently to work with.
Following this journal, we will consider how to use it...
<ul>
<li>
Paint and decorate the tree with light-storing spray
</li>
<li>
Make cool sunlight photo works with light-sensitive paper and put them up
</li>
<li>
Decorate the entire surface with beads by gluing and glueing.
</li>
<li>
Put up a calendar with small letters for 12 months.
</li>
<li>
Try to draw patterns like Escher.
</li>
<li>
Draw a picture of congratulations and send it as a New Year's greeting card.
</li>
<li>
Make a polyhedron album by pasting your favorite photos
</li>
<li>
Make your own tent out of cardboard, enlarged enough to accommodate people.
</li>
</ul>
I'm sure there are many things you can do.
Make a foldable tetrahedron, cube, octahedron, icosahedron, etc.
and display them like specimens.
Maybe you are a polyhedron fan!
Well, that's all for today.

Kodomo no Kagaku_January 2021_Kodomo no Kagaku Kenkyujo

<h3>Sample photos of paper TMT</h3>
Good morning. 
Today, the cat has knocked me up again, and it is said to be snowing now. 
The cat is quietly pecking away as I push her into the futon.
Once it wakes up, the imaginary room comes out in a whimper. 
An imaginary air worker starts doing all sorts of things. 
Then the air Adobe sketch starts up, and finally the air irrale starts up. 
It gets busier and busier, so I get up. 
(I have to take a good look at this worker's room.)
Well, this is turning into a series of things that can be found on a hard disk. 
This time, the first sample of paper TMT.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-44.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-31.jpg" alt="" />
The copy paper with the drawing of the beginning of the production is also saved. 
I can make a feature article called &quot;How Styrene TMT was made&quot;, but it would be too complicated. 
I could write a feature article that would be rather lengthy, but 
This is the end of the process.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-21.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-15.jpg" alt="" />
TMT drawings do not yet exist and were made by The ・Craftsman, 
Into the stiff 3D CAD data 
My air worker enters, holding his breath. 
Captain~. 
There are too many lines in the data. I can't see them,&quot; said a voice. 
The computer is too heavy and the data doesn't move smoothly. 
I don't know how to operate the CAD system.
I thought, &quot;This is a bad idea, 
The air worker said, &quot;I can see it, it's fine. 
Then they disassemble the structure, look for working parts, measure all the angles, and make a deployment diagram of the head. 
I measured all the angles, made a development plan in my head, and drew it in illustrator (not CAD). 
（and draw it with illustrator (not CAD). 
I did this tremendous number of times.
I made a small number of color copies of this design. 
I need to record that too.
It's snowing! 
That's enough for today. 
See you next time.

Sample photos of paper TMT

<h3>Push and Squeeze! Sea Anemone Predation</h3>
In the November 2022 issue of Kodomo no Kagaku (Children's Science), &quot;Fun Craft Development Site: Kodomo no Kagaku Seisakusho&quot; features &quot;Predation of Sea Anemone&quot;. 
This is a creature-like object made of cardboard and plastic bags. 
This time, cutting and folding should not be so difficult. 
The only thing to be careful of is 
The only thing to be careful of is to make sure that the tentacles don't snap when you insert them into the main body. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-5.png" alt="" />
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-1.png" alt="" />
<h4>[photo taken during prototyping]</h4>
Fish sweating.
I think the sweat was acceptable to Coca readers, but... 
I had to behave a bit like a well behaved scale for the show. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-22.jpg" alt="" />
I've been thinking about making some kind of creature for this piece. 
I was looking at the structure of anemones, which I had been curious about for a while. 
I started to look for a video of an anemone that I had been curious about for a while. 
I came across the horrifying sight of a big fish eating a big fish. 
I thought, &quot;This is a big deal. I decided to make it.
<h4>[extra]</h4>
Idea sketch. 
The editorial staff was &quot;grossly amused&quot; by this piece. 
Okay, I'm glad I got the message across. I thought to myself. 
It's great that something can be conveyed with this. 
I will use &quot;grossly funny&quot; somewhere in the future. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-16.jpg" alt="" />
I have another idea sketch that is in the preliminary stage and a bit more complicated, 
I'll publish it another time. 
See you next time.
The article and the development plan are in the November 2022 issue of KIDS' SCIENCE. 
Please buy a copy.

Kodomo no Kagaku_Nov. 2022_Kodomo no Kagaku Seisakujo

<h3>I forgot to write a review for the New Year, so I'm writing it now.</h3>
Jari-koppe. 
Almost same as Space Apollo. 
The crunchiness is stronger than Space Apollo. 
I can't help repeating the name &quot;Jari-koppe&quot; in my mind while I eat it. 
<a href="https://www.pasconet.co.jp/products/2631/">https://www.pasconet.co.jp/products/2631/</a>
I'm interested in brown sugar &amp; kinako.

Jarikoppe__Pasco_&#8217;s records

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-45.jpg" alt="" />
Besides the Christmas tree 
I opened up a gorgeous four-room &quot;picture book&quot; with many gimmicks and took it out 
for a while. 
My 6 year old boy came to the book and mumbled 
and starts to make up his own story using the doll parts that come with the book. 
I leave him alone. 
He is a heavy user of Pokemon, Mario, Atsumori, Micra, etc. 
but he seems to enjoy these things as well.
I put it out for a while. 
I think of it like a hanging scroll for the alcove. 
I guess hanging scrolls and bellows things are like itcho.
I had kept this picture book as a reference before he was born. 
It looks like it is for girls, but I heard that boys also enjoy it. 
There is a &quot;home&quot; and an &quot;outside&quot; in the book. 
so you can go to &quot;somewhere outside&quot; right away.
Various heavy specifications. 
Sparkling special printing, different materials 
Lots of hand-made gimmick processing. 
Illustrations are nice and full course 
Doll parts are large capacity with tuna on sheets
At Christmas time 
I would like to have a small box like a present box. 
I would like to have a small box like a gift box.
The Winter Holidays of the Young 
<a href="https://www.amazon.co.jp/dp/4499282322/ref=cm_sw_em_r_mt_dp_7jN3Fb4RVESH7">https://www.amazon.co.jp/dp/4499282322/ref=cm_sw_em_r_mt_dp_7jN3Fb4RVESH7</a> 
<a href="https://www.ehonnavi.net/ehon/23794/ようせいのふゆやすみ/">https://www.ehonnavi.net/ehon/23794/ようせいのふゆやすみ/</a>

Cue the picture books.

<h3>To grade 1, explain the clock (part 2).</h3>
Continuing from the first part, here is the second part. 
This time, we'll look at clocks with depth. 
The &quot;minutes&quot; look different from the &quot;hours&quot;. 
The &quot;bounce&quot; of the clock looks like a meter, which is quite nice. 
Stand the clock up like this. ↓↓↓↓↓
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-48.jpg" alt="" />
From 20 to 40 minutes, the letters are opposite from the bottom. 
You can reflect the letters if you want. 
I would probably want to spin it around and play with it, so 
I left this one as it is. 
It will look like a hybrid when I combine it with the next flower shape! Maybe.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-32.jpg" alt="" />
By the way. 
The laminated material used in this sample is 
The thickness of the cardboard is about 1mm. 
about the thickness of a corrugated cardboard envelope.
The blue one is a split pin. It is possible to make split pins with paper alone, but 
(Recently, the color split-pin boom has been going on. 
(Recently, there has been a color split-pin boom.)
The transparent part is a 2 mm thick PVC board. (It can be cut with a cutter.)
For the needle, cut and paste a printed out sheet of paper. 
For the meter, the lines are drawn straight with the thinner side of the makki.
The &quot;hour&quot; (short hand) is not made by folding the PVC board into an L-shape. 
It goes around flat (on a 2-dimensional board). 
It is the same as the usual clock, but the lines are drawn with a makki. 
It turns comfortably when a washer is inserted.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-23.jpg" alt="" />
This is what the backside looks like. It looks like an old wooden bathtub. 
A dodecagonal board is inserted and glued.
That's enough for today.
If you want to make 700,000 copies of this kind of thing, please contact me and we will probably finish it in a mach. 
I look forward to working with you.
See you next time.

To grade 1, explain the clock2

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-49.jpg" alt="" />
I can't tell you at all from the pictures. 
It looks like a computer graphics object 
It looks like I grabbed it off the screen and pulled it out. 
The paper craft was made. 
It is not just a silver mirror, but made of aurora-colored material. 
When you shine an LED or sunlight on it 
The light scatters like a prism. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-33.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-24.jpg" alt="" />

Aurora Prism Paper Craft

<h3>Continuing from the last issue, here is a human skeletal model (mini).</h3>
We will make the sternum + rib cartilage.
We will start with this part. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-52.jpg" alt="" /> 
Ribs
<ol>
<li>is already attached, so we will start with ribs</li>
<li>are already attached, so we will start with the ribs. 
The mini is the thickness of the paper relative to the size you want to complete. 
If you open the insertion slit in advance with a thin sheet of paper, you can easily insert the paper. 
You can easily insert the paper by opening the slit in advance with a staple punch. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-34.jpg" alt="" /></li>
<li>ribs</li>
<li>and ribs</li>
<li>are inserted. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-25.jpg" alt="" /> 
Rib.</li>
<li>has just been inserted. Rib.</li>
<li>is already there. 
Next, ribs</li>
<li>and</li>
<li>
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-17.jpg" alt="" /> 
It will look like this. In case of mini, if it is hard to insert 
If it is hard to insert, you can put it on the top. 
After this is done, turn over and attach the sternum, ribs, and clavicles in this order.
</li>
<li>and collarbone in that order. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-11.jpg" alt="" /> 
If it is difficult to assemble, cut the pink line and adjust it. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-8.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-5.jpg" alt="" /> 
When you have reached this point, apply a small amount of wood glue and close the lid. 
You can also tape the top. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-6.jpg" alt="" /> 
Fold the sternum to make a lid with the sternum. 
Put some wood glue on the two ears to hold the collarbone. 
glue on the two ears to hold the collarbone, and fold them.</li>
</ol>
Now the sternum + rib cartilage part is done. 
Good work!
Next time: Vertebrae, Ribs

Making a human skeleton model (mini)_Chapter 3: Sternum_Costal cartilage

<h3>I think any job is similar.</h3>
Some people talk about wanting to see the production site and 
what they are doing during production. 
I have never written down the parts that you can't see, so I will write it down.
If you are not making something that has a rule, but 
I just have a myriad of destinations. 
To decide one direction you want to go, one direction you should go. 
I dive into the heavy, deep, dark sea. 
(I keep sinking because I get giggly until I dive)
Now, let's say you've dived safely. 
Even if you think you've been here once before 
You may find a new small side hole (probably dug by yourself). (Maybe you dug it yourself) 
You search for a while in the dark. 
I can't see it at all, this one is different, and so on, and it becomes scattered. 
I pick the one I've never seen before, and the one that looks the most suspicious, 
We draw them or actually use paper to think about them.
By the way, if you see something before you dive, put it in your pocket as a reference material. 
Keep it in your pocket as a reference material. 
I show this reference material as a &quot;rough sketch&quot; to the client. 
I show it to the client as a &quot;rough sketch. 
but often something different from what I'm looking for appears.
Maybe this is the right one, but I'll look for more. 
When I get to the point where I think, &quot;Oh, I think this is it after all. 
Once I have decided on the direction to go, I go out of the dark and into a dimly lit place. 
I draw a plan and make a prototype on paper.
I ask the client, &quot;Is this what you're looking for?&quot; (If I make it myself, I confirm it.) 
(If I make it myself, I check with myself.) 
If the client confirms, &quot;Yes, yes, this is what I am looking for. If you can confirm that this is what you are looking for, you can proceed to the designing process, 
we proceed to designing the product so that it can be used as a product.
That's all. 
It is dark at the production site. 
When you feel someone's presence 
the floating development plans and 3D images disappear.

The production site is pitch black.

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-55.jpg" alt="" /> 
I didn't know what to eat for lunch. 
I went to Famima and found a bread called &quot;Space Apollo&quot;. 
It is smaller than a strawberry sandwich. (135 x 70mm) 
It was placed at the bottom of the shelf. It looked like it had fallen off. 
A position for a child to find.
As we are a company that makes and sells observatory goods 
space, we can't help but buy it. 
(This is the one that goes out into space.) 
Well, I bought it because it's cute. 80% of our products are cute.
Look at the cross section. It's soft. 
There's a little bit of coarse lamella in it. 
This is a star! Ptzlaine is a star! 
The milk-flavored cream is puffy in the middle! Maybe it's a galaxy! 
The outline is of course the moon. It's yellowish. 
And the browned side is the inner side. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-35.jpg" alt="" /> 
I had git git tsukemen for lunch. 
I had this as dessert. 
It's so relaxing. 
Please prepare barley tea or coffee.
Our company's middle man2 looked it up and found out that it was the one &quot;introduced on TV&quot;. 
It is only available for a limited time.
For details, please visit Fuji Pan's website.
<a href="https://www.fujipan.co.jp/news/008165.html">https://www.fujipan.co.jp/news/008165.html</a>

Space Apollo_Fujipan Records

<h3>This is what happens when you make popups very fast.</h3>
I don't think it's a good idea to show the behind-the-scenes of a pop-up. 
I'm not a big fan of showing behind-the-scenes stuff, but I found some pretty bad stuff and laughed at it myself.
First of all, let me tell you about my PC's hard disks... 
I had 5 hard drives. 
It was like Kowloon Castle for a long time. 
I used to be able to remember where they were, but now I have to search for them. 
But now I have to search for them, and when I don't know the search word anymore 
I have to do a treasure hunt.
One of the first ones blew up about 25 years ago, and I was so disappointed that I couldn't remember where it was. 
I remember that I was so disappointed that my body turned translucent, and 
I still bring it with me every time I move, like a tomb.
There are quite a few rough drawings and data of the production process that are still there. 
(The theory is that I just didn't have the time, energy, or inclination to organize them.) 
Recently, I finally figured out, or rather decided, how to sort them.
So, I decided to sort them. 
I found a video of me making pop-ups at a very fast pace. 
I found a photo of me making pop-ups at a very fast pace. 
I felt that this photo conveys the atmosphere of the production process.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-58.jpg" alt="" />
First of all, look at this. 
I thought, &quot;Popups aren't something you can &quot;make very fast&quot;... 
I thought. But, 
At this time, I had to make it very fast.
There is no boundary between &quot;thinking&quot; and &quot;creating. 
It is not a matter of writing letters or drawing pictures. 
This is when it is faster to write in letters. 
I write things down because I do so many things at once and forget them. 
If I think it is faster to understand the result by making it, I don't write it down. 
I put shadows on diagrams and so on. 
I want to verify what I have created in my mind, but 
I didn't know which was faster, making or drawing. 
I was not sure whether it was faster to draw or to create, but I decided that drawing was faster. 
If the actual product does not turn out well, I have to make it over again. 
But if it doesn't turn out well, I have to make it over again.
By the way 
I have a good idea of the size of the paper to be used. 
I can usually get a good impression of the surface.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-36.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-26.jpg" alt="" />
What do you think? 
Isn't this easy to understand?
That's enough for today. 
I will continue to work on Kowloon Castle. 
See you next time.

This is what happens when you make a pop-up very fast.

<h3>To grade 1, explain the clock (part 3).</h3>
The cat wakes me up again today. 
It looks like it's going to snow again.
To be continued. Flower Shape. 
A formula that divides into minutes and hours, layers on top of layers, and dodecagons. It is a dodecagon. 
I put numbers on the sides. 
Not &quot;1:00&quot; or &quot;1:05.&quot; 
1 hour, 1 minute, or 5 minutes. 
I want to make it easy to make them, 
I'd like to be able to see them.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-59.jpg" alt="" />
*If the font for minutes and hours is &quot;tanuki oil-based magic&quot;, it will have a Showa feel...
The petals are turned over by superimposing &quot;hour&quot; on &quot;minute&quot;.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-37.jpg" alt="" />
Put the previous &quot;clock with depth&quot; on &quot;minutes&quot;. 
It can be used as an option. 
I hope it will be fun to have clocks of different shapes, but with the same contents. 
I think it would be fun to have clocks of different shapes, but with the same contents. 
It would be nice to have a variety of playground equipment that people can play with one after another, 
I think it would be great if we could have a variety of playground equipment.
I think it would be a good idea. <a href="https://wp.honya.dev/wp-content/uploads/2023/09/0003-27.jpg"></a>
Oh, by the way, there's a flower called &quot;tokeiso. 
I didn't start out trying to make a flower shape.
Our monitor is 7 years old. 
but he doesn't seem to want to do his homework.
That's enough for today. 
See you next time.

To grade 1, explain the clock3

<h3>TMT's paper crafts are now open to the public.</h3>
I made a paper craft of TMT, but it is hard to cut the paper, so I made a pre-cut kit. (Incidentally, the data is available at <a href="https://www.nao.ac.jp/gallery/paper-craft/telescope.html">NAOJ website</a>.
The TMT as well as the Nobeyama 45m are newly designed for ease of construction. It would be interesting to compare them with the paper crafts that are available to the public. I would like to make Subaru and Alma, but I haven't gotten around to it yet. 
I've included an assembly guide, which you can download from our website, but it will take you about an hour to assemble the pre-cut kits.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-6.png" alt="" />
You can see how huge TMT is when you put it side by side with the Nobeyama 45m Radio Telescope Paper Craft of the same scale (1/500). Please assemble both of them and imagine the super huge telescope that will be built higher than the summit of Mauna Kea, Hawaii and the summit of Mt. 
For sale in our online store <a href="https://shop.honyaplan.com/products/3d-puzzle-craft-kit">click here</a>

Kireteru Paper Craft _National Astronomical Observatory of Japan_Telescope Craft Kit

<h3>Continuing from the last issue, here is a miniature skeletal model of the human body.</h3>
We will make vertebrae and ribs.
<h4>[vertebrae -&gt; ribs 12,11]</h4>
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-60.jpg" alt="" />
Only the side with many slits is assembled! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-38.jpg" alt="" />
Insert rib part #12 into the slit from the bottom. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-28.jpg" alt="" /> 
Next, insert rib part no. 11 ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-18.jpg" alt="" />
View from the back. It is fixed by hooking with a small nail ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-12.jpg" alt="" />
After folding the mountain, we raise it up ! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0006-9.jpg" alt="" />
<h4>[rib 10 to 1]</h4>
As shown in the photo, starting from 10, glue the ribs so that the numbers on the left and right sides of the ribs overlap. 
Use glue or other adhesive tape to affix the ribs. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-6.jpg" alt="" />
I've finished pasting all of them! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-7.jpg" alt="" /> 
The front side looks like this! 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-6.jpg" alt="" />
Insert from No.10 to No.1 in the same way as No.11 and No.12. 
(Use tweezers to reach the places you can't reach.) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0010-5.jpg" alt="" /> 
Is something like when you finish eating grilled fish? 
Once this process is done, the rest will be easy.
Next time:
<h4>[finishing the vertebrae, connecting the pelvis to the spinal column]</h4>

Making a human skeleton model (mini)_Chapter 4: Vertebrae_Ribs

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-63.jpg" alt="" /> 
Today, bagged rice (approx. 1 kg) 
Pack it in a box no thicker than 3 cm. 
The paper is G-dan, which is attractive for its thinness. 
The shape can be adjusted, so I'll give it a try for now. 
Click Post has a weight limit of &quot;up to 1 kg&quot;. 
If you pack 1 kg of rice, the weight of the box will be exceeded. 
Click Post is supposed to reduce the weight of rice only by the weight of the packaging box. 
(1 kg = 6.7 cups) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-39.jpg" alt="" /> 
First of all, I'll make it like a normal shipping box. 
Since it is a food product, the four corners should be sprung so that they will not be exposed. 
When you stand the box up, the rice will move around. 
The middle of the box will bulge out and be over 3 cm. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-29.jpg" alt="" /> 
The part of the rice is losing its shape.
I'll try to make a fold so that the middle part will be within 3 cm. 
I'll try to make a fold. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0004-19.jpg" alt="" /> 
I'm folding it inward to try it out. It holds the fold in place. It will hold it in place. 
I'm also going to try just folding the lid back in. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0005-13.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-63.jpg" alt="" /> 
I can close it nicely, but it rebounds when I put the gummed tape on it. 
I'll see if I can do something about it, but for now it's dead. 
↓↓↓ 
Using the first sample, I tested the lid. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0007-7.jpg" alt="" /> 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0008-8.jpg" alt="" /> 
It stops even without tape. 
I'm not sure where the folded in flaps went, but I'll see if I can't stretch the flaps out. 
I'll see if I can't stretch out the flaps to make it work. 
(I know what it looks like, and I have a few ideas, so I'll go ahead with miniatures.) 
↓↓. 
Lengthen the left and right flaps. 
(I know how it looks, and I had some ideas, so I'll go ahead with the miniature. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0009-7.jpg" alt="" /> 
Cover and hold from the bottom as well, making it look more dependable. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0010-6.jpg" alt="" />
↓ 
It tucks in snugly. 
For shipping, put a piece of tape on the top and fasten it around the back. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0011-4.jpg" alt="" />
Finished.

Place in a box no thicker than 3 cm1

Past cases, added. → &quot;Past Case Studies&quot;
<h4>[Hachioji Minami IC of Ken-O Expressway]</h4>
(<a href="https://shop.honyaplan.com/blogs/honyareco/%E5%9C%8F%E5%A4%AE%E9%81%93%E5%85%AB%E7%8E%8B%E5%AD%90%E5%8D%97ic-%E3%83%9D%E3%83%83%E">https://shop.honyaplan.com/blogs/honyareco/%E5%9C%8F%E5%A4%AE%E9%81%93%E5%85%AB%E7%8E%8B%E5%AD%90%E5%8D%97ic-%E3%83%9D%E3%83%83%E</a> 3%83%97%E3%82%A2%E3%83%83%E3%83%97) 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-27.jpg" alt="" />
A side note on highway pop-up production
This is the first time I saw a drawing of a highway. 
It's all lines, but they're all black. 
I started by staring at it to see which lines to use.
Detailed data is provided, and there are two types of patterns: &quot;with&quot; and &quot;without. 
The work is different.
When I went to the mold making site for this job 
I remember the scream of the mold maker, &quot;Who the hell designed this? 
I remember one word from the mold maker, &quot;Who the heck designed this? (Good memory).
I'm sorry, but this is still very simple. 
But if I were to make a smaller version now, I would change the design.

Honareko: Past cases_Hachioji Minami IC of Ken-O Expressway added

<h3>&quot;We'll have a comfortable, convenient store!&quot;</h3>
For owners who have been using analog methods, but still want to sell products and write blogs on the web, or want to review their existing sites, we offer a set of packaging, paper goods, and e-commerce sites.
<h4>[I want to fix my packaging].</h4>
I want to make it easier to wrap the products I want to sell (by myself). I don't want to waste time and energy wrapping products in wrapping paper. I want to make it look better. Want to make it possible to ship products via the Internet. You want an original design, but don't want to spend too much on packaging. In such cases, we have boxes like this one, for example. 
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-24.jpg" alt="" />
<h4>[production quantity issue].</h4>
The photo (above) is a white sample made by honyaplan, which was made on request. Even for a simple packaging box like this, the unit cost of the box will be high unless a large number of boxes are produced, especially if they are processed by hand or pasted by machine. However, if many small store owners gather together, they can save on the cost of molds if they use the same molds.
However, it is possible to make a very small number of boxes, but they will be cut out with an on-demand cutter or a laser instead of a die. It is still rather expensive.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0002-17.jpg" alt="" />
<h4>[Paper and Packaging, Thoughts]</h4>
There are a lot of things to think about, but they are mostly fixed.
What size and weight of the product, whether it is watery or dry, what season you want to sell it, how to reduce the postage cost, what kind of paper to use, how you want the product to be taken out, whether you want to add extras or cards, and so on.
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0003-12.jpg" alt="" />
<h4>[just the right size]</h4>
For example, this box was made to hold prepared foods, but when I put 300 grams of rice in it, it was just right. I put 300g of rice in the box, and it was just right. 150g per 1 cup is equivalent to 2 cups. It is just right for a gift of delicious rice, for example. Beans would also work well.
<h4>[with e-commerce site]</h4>
The e-commerce site and the packaging are two different things, so we have to take care of both of them separately. So, we have to have a lot of meetings. So, I would like to have a single point of contact, even though we do different things! I agree.
Honyaplan provides a single point of contact for all your EC site and packaging needs. We can prepare a website that you can update by yourself. (We can take care of just the boxes or the EC site)
If you are interested, please contact us.
Here is our email address. <a href="mailto:info@honyaplan.com">info@honyaplan.com</a>
We look forward to hearing from you!
Next time: When paper goods and e-commerce sites get along
<h4>[part 2]</h4>
I want to send it by Click Post.&quot;

When paper products and e-commerce sites get along_Part 1

<h3>The National Astronomical Observatory of Japan (NAOJ) Nobeyama Cosmic Radio Observatory is open to the public for a special open house.</h3>
Saturday, August 28, 2021 
It will be held online and onsite
Unless a state of emergency is declared in Nagano Prefecture, the number of events will be limited and the scale will be kept quite small. 
the number of projects will be narrowed down and the scale will be considerably reduced 
There may be a possibility to hold the event with advance reservations.
For more information, please visit the following site 
<a href="https://www.nro.nao.ac.jp/visit/open2021/open2021.html">https://www.nro.nao.ac.jp/visit/open2021/open2021.html</a>
Honyaplan will refrain from exhibiting. 
We will be online and viewing over space beer. 
National Astronomical Observatory of Japan goods are available at the online store.
See you next time.

National Astronomical Observatory of Japan_Nobeyama Radio Observatory Special Open House 2021

<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/tmp-19.jpg" alt="" />
I bought a used book from Amazon.
It arrived wrapped in a thin wrapping paper with an illustration of a rose printed on it.
(A Click Post slip was attached to it.)
Come to think of it, last year I had an acquaintance
I got a Gundam plastic model wrapped in wrapping paper with an illustration of a rose printed on it.
At that time, too, I got a funny little giggle.
Oh well, what in the world is this?
It turns over when it comes in a rose.
A piece of paper is extraordinary.
I kind of want one myself.
&lt;<a href="https://shimojima.jp/shop/pages/heiko.aspx?utm_source=google&amp;utm_medium=cpc&amp;utm_campaign=adw&amp;gclid=CjwKCAiAr4GgBhBFEiwAgwORrWSKZ4">https://shimojima.jp/shop/pages/heiko.aspx?utm_source=google&utm_medium=cpc&utm_campaign=adw&gclid=CjwKCAiAr4GgBhBFEiwAgwORrWSKZ4</a> lr9Cu3NaGXmN1xcWRVnnkjkgPuBao1TLTqnxGWk__w-nwUYBoC3GsQAvD_BwE&gt;
The wrapping paper in the photo would be this.
Half-size 757x530, fine quality 60g/m2 GS Rose, 100 sheets per pack
Oh~!
There is also a newspaper-like one that was used when I bought some art materials somewhere.
Half-size 757x530 pure white roll 47.2g/m2 feather initials 100 sheets per pack
This is quite a strong pull, since it remains in my memory.
The famous &quot;Stop Pail&quot; has been made into various goods.
Ehh...
We want to make wrapping paper for our company, too.

Review the destructive power of Showa wrapping paper

<h4>[new content]</h4>
<img decoding="async" src="https://wp.honya.dev/wp-content/uploads/2023/09/0001-3.png" alt="" />
We have created a new page, &quot;Examples of Past Projects&quot;. 
Scroll down to the bottom of the Honyaplan website.
Click here for Honareco and direct line. 
<a href="https://honyaplan.com/blogs/honyareco">https://honyaplan.com/blogs/honyareco</a>
The production people in Honyaplan will record here what they have made so far. 
that have been made so far by the production people in Honyaplan are recorded here.
So far, we have started with large paper crafts. 
Paper crafts are only a small part of the world of paper work. 
paper craft is just a small part of the world of paper work. 
I would like to make it possible to see various types of work. 
Thank you in advance for your cooperation.
The past is too far away to see when you realize it! 
Quickly!

Honyaplan.

Special Paper Device Design & Production | HonyaPlan

Blog Posts